Beneteau Oceanis 373 Clipper – Used sailboat in very good condition
2 cabin version - Ready to sail
This superb Beneteau Oceanis 373 Clipper is meticulously maintained. This owner’s version with two cabins offers generous volumes, exceptional comfort, and recent equipment. Ready to set sail, it will appeal to demanding sailors seeking a seaworthy, comfortable, and easy-to-handle sailboat with a reduced crew.
Fully equipped, this sailboat combines remarkable living comfort aboard (spacious, bright, and warm areas) with a comprehensive and modern level of equipment, both in terms of comfort and navigation electronics:
- Shallow draft keel (draft 1.60 m)
- Teak deck, benches, and cockpit floor
- Foldable teak cockpit table
- Genoa and mainsail on roller reefing (original sails in good condition)
- Freshwater tanks 360 L with electronic gauge
- Heating/air conditioning equipment (to be serviced)
- Bow thruster (battery July 2025)
- 3 service batteries (July 2025)
- Engine battery (September 2025)
- ST 6000 navigation system
- Autopilot
- GPS
- Radar
- Fixed VHF
- Automatic bilge pump
- Electric winches aft
- Bimini, sunshade, steering cover, winch covers
- Loading mast
- 80 L black water tank
- Electric windlass with fore control (wired remote) and
- helmsmen's column
- Max Prop three-blade propeller
- TV antenna (masthead) and TV
- Pressurized water connection port
- Cockpit shower – hot/cold water
- Seawater pump on sink
- 2 refrigerators
- 300 W inverter
- Rear sunshades
- Teak gangway
- Radio with 4 speakers (2 in saloon + 2 in cockpit)
Specifications and engine
This sailboat is powered by a Yanmar 40 HP engine with only 700 hours of operation, coupled to a Max Prop tripled blade propeller, ensuring reliable performance and excellent maneuverability. It features impressive autonomy thanks to its large 360-liter freshwater tank and 80-liter black water tank, key assets for long cruises. Version with shallow draft keel (draft 160).
Handling and navigation
The Oceanis 373 has been designed to simplify life on board. It is equipped with a roller furling mainsail and two electric cockpit winches, making sail trimming and reefing easy and allowing to trim the jib alone from the helm. The bow thruster enhances port maneuvers. Additionally, the pivoting steering wheel offers a wide, smooth passage to the aft platform and cockpit. Navigation electronics feature recent Raymarine gear, including an autopilot, GPS, and radar accessible directly at the helm, complemented by a fixed VHF.
Exterior and interior comfort
The cockpit, with its pristine teak seating, is protected by a sunshade and a Bimini with side panels and a sun awning. The exterior also includes a deck shower (hot/cold water), a pressurized dock water connection, protective covers for the steering and winches, a small loading mast, and an elegant teak gangway.
Inside, the spacious, bright saloon features a TV with an antenna. The galley is well equipped with two refrigerators and an oven. Hot and cold pressurized water is available throughout the boat.
Electricity and autonomy
The electrical system was completely renewed and optimized in 2025. The boat is equipped with a new battery bank including an engine battery, three service batteries, and a dedicated thruster battery. A 300 W inverter completes this setup to power small appliances.
Highlights
Very solid boat, ready to sail
Bow thruster
Raymarine autopilot, GPS, and radar
Rope roller mainsail and electric winches
Pivoting steering wheel
Two cabins, owner’s version
High-end equipment level, safe and enjoyable navigation
This reliable cruising sailboat, this Beneteau Oceanis 373 Clipper used, is ideal for a family or a small crew wishing to sail in complete serenity, whether for day trips or long coastal cruises.
Last servicing in 2025.
Would you like to visit it? Or need more information? Contact Sebastien at 06 11 56 27 99
