Here is the brand new Cap Creus 850 WA, a boat with its own identity.
Made in France, this boat is manufactured in Canet en Roussillon.
The equipment!! Unlike other manufacturers such as Jeanneau or Beneteau, for example, we have no options!!
Our commercial policy equips as standard everything that might be optional elsewhere.
Standard, this boat has everything with refined finishes!!
The list is long, you will see!
Polyester hull with 3 buoyancy compartments
Twin V6 225 Mercury White engine (motorcycle acceleration)
Front sunbathing area
Rear sunbathing area
Dining area for 6 people
Solid teak table with 2 folding sides
Folding bench or bench with storage chest choice
Flexiteek all over the boat including engine well and on the deck under the front sunbathing area
4 mooring cleats
4 folding cleats
3 18 MM chains
Electric windlass
Anchor line 50 meters plus bow roller and stainless steel anchors
Courtesy lights
Fusion 4 speaker illuminated pack
2 Simrad 12 inch go GPS fishfinder screens
Wesseview link Mercury
Waterproof induction charger and ScanTrust phone dock
Double USB socket
Mercury DTS throttle control with digital screen and active trim
Livewell for fishing with faucet for deck washing or for ice and champagne
2 pilot seats with armrests
2 footrests
10 illuminated cup holders
Livewell lighting
Engine ventilation lighting
Underwater lighting
4 batteries 100 amps with engine battery and service battery combiner
Victron shore charger plus shore extension cables
220v power outlet plus differential switchboard under consoles
Sink under pilot seats
2 gas stoves under pilot seats
Built-in fire extinguisher in pilot console
75 L freshwater tank with freshwater pump
2 fuel tanks of 200L each giving 400L autonomy
2 original Mercury fuel pre-filters
Automatic bilge pump
Navigation lights
Dual horn pneumatic sounder
Removable locker for caught fish or fins, mask, etc....
Stainless steel engine protection with 4 welded rod holders and ski ring
Hydraulic steering with Verado type pump and two standard rams
Stainless steel tilt steering wheel
Standard Horizon VHF
Imagine 3-in-1 transducer
Bilge fan
Stainless steel recessed swim ladder
Swim platform xxxxxxxxxL
Handrails on swim platform
Stainless steel handrails on windscreen and cabin entrance
Livewell cover with backlighting with the option to change it to the boat's name
Console and pilot seat covers
All upholstery is removable except pilot seats
Cabin section
Alcantara roof lining
2 berth cabin mattresses
4 storage lockers
2 niches with courtesy lighting
2 reading lights
2 double USB sockets
1 220 volts power outlet
1 chemical toilet under mattress
3 storage lockers under mattress
Bimini
I think I have covered everything! In short, this boat is the result of my collaboration with Felix Blanco, a friend with thirty years of polyester experience who, like me, is passionate about boats.
This Cap Creus uniquely has no visible joint between hull and deck like Pardo boats for example or Invictus.
We build to measure; you can choose and configure your boat.
This Cap Creus measures almost 9 meters by 2.62 and 7.99 meters in certification.
Its sea passage is impressive thanks to its own hull DNA, a straight stem, and tulip-shaped sections followed by fast track chines to reduce water spray.
The forward helm station, like the old Rivas, provides a gigantic aft lounge.
Lowering the table allows creating two additional berths.
The boat is available in WA and sport top versions with glass windshield and wipers, both at the same price.
This boat directly competes with Saxdor or Axopar for example but is made in France at an unbeatable full option price!!!!
