The CRANCHI great tradition has, in the Master Cruiser, its best element of identification, offering plenty of space for people on board, as well as everything they might need. It is hard to think of more complete “family-style” models: here, everything was created around the idea of comfort, to make life on board even more enjoyable. A design based on clean, elegant lines, while not giving up anything in terms of interior dimensions, where the accommodation level is remarkable. Boats designed to accompany you on your cruises, whether they are short or longer ones, always offering an unrivaled level of safety and sea-keeping. The “greatness” of these models is also evident in the details, with the many useful and functional ideas: from countless bilge lockers in the keel where you can store food, clothes or other items, to the many pockets and holders, to the practical wet bars in the cockpit, with their mixer tap sink and refrigerator (on request).
- Self-draining cockpit
- Servo-assisted opening for the engine room porthole with electrical and manual control for emergencies
- Wet bar with sink and tap (cold water)
- 65 ltr refrigerator (extra) support
- L-shaped seating area with side pocket for storage
- Glass holder
- Teak table
- No. 2 automatic fire extinguishers in the engine room
- No. 1 manual fire extinguisher in the cockpit
- Support for 3 kg gas bottle
- Adjustable, swiveling pilot and co-pilot seats for two driving positions
- Co-pilot sun lounger
- Trim tabs
- Shower with mixer
- 32 Amp shore power outlet with shore power cable
- Lighting
- Storage area for liferaft on the bathing platform
- Teak bathing platform
- Folding bathing ladder with handle
- Boat hook
- Owner's manual
- No. 2x100 Amp/h (each) batteries
- Power uses on electrically protected panel with magne-to-thermal protection
- 32 Amp rear outlet with cable
- Automatic 30 Amp/h battery charger
- 230 Volts differential fuse
- Galvanic insulator
- Battery switch
- Cathodic protection on all water inlets
- Forward compartment
- 700 W electric windlass
- 10 kg Bruce type anchor
- 50 m of 8 mm chain
- Aluminium anchor stop
- 2 AISI 316 stainless steel cleats at the bow, 2 with springs and 2 at the stern
- Stainless steel pulpit with front opening and safety closure and guardrail
- Forward fender support for 4 fenders
- Friction strip
- No. 2 hatches
- No. 6 opening portholes
- Windshield with glass at the front and anodized peraluman frame
- Central windshield wiper
- Navigation lights
- Flagstaff pole
- Honk/sound horn
- Fuel filler cap in stainless steel
- Fuel tank expansion vessel with flame arrester and anti-splash net
- Water filler cap in stainless steel
- Water tank ventilation
- ?U?-shaped hooks at the bow and at the stern
- Stainless steel scuppers port and starboard
- Hydraulic trim tabs
- Moulded non-slip platform
- Engine control by electronic levers
- Power-assisted steering
- Hydraulic steering
- Rudder angle indicator
- Complete engine instrumentation: echo/log bidata
- Oil pressure and water temperature gauges, voltmeters, hour meter, rpm counter, trim indicators
- Fuel level gauge
- Ritchie compass
- Horn control
- Trim tab control
- Navigation and mooring light control
- 12 Volt outlet for mobile phone
- Radio control
- Bow thruster control
- Lighting for engine instruments
- 530 ltr steel fuel tank with approximate capacity with inspection hatch and depth gauge
- Copper fuel pipes with flexible ends (approved R.I.NA./EC)
- Additional fuel filters
- Blower (petrol version)
- Fuel shut-off valves. Bilge drainage is ensured by an automatic electric bilge pump of 65 l/min for the cabin compartment
- No. 1 electric pump 120 l/min with manual control for the engine room
- No. 2 manual pumps (one at the front, one at the stern)
- Food-grade non-toxic polyethylene water tank with approx. 165 ltr capacity
- Water pump
- Electric water heater approx. 25 ltr with safety valve
- Pressure reducer