Jezequel Diagado 5.60

Digadao, 5.60 Jezequel, Carantec. 1971, No.16
Digadao was fully restored in 2015-16
The hull was in excellent condition and did not require
The deck and cabin roof are original and have been restored
The spruce mast is original and has been restored, along with the boom and the spinnaker pole

Description of work carried out
Keel
Decaped, sanded, left to dry for 1 year, 4 coats of Mistak Fondo (Boero), antifouling
Hull
Living parts: Decaped, lightly sanded, joints emptied, caulking, flexible joints Gyso 555, 4 coats of Mistral Fondo, antifouling.
Deadwork: Decaped, joints emptied, caulking, 2k joints, 4 coats of primer, 3 coats of Epifane varnish, bow restoration, new inox fittings.
Deck
Decaped, restoration of damaged areas, epoxy joints West System along the sheer line and cabin, beveled the edge of the deck and glued mahogany epoxy on the deck edge, extending onto the planking, same for the cabin
The deck and cabin roof have been treated with epoxy then 2 coats of 2k paint and anti-slip
The gratings are new, glued-screwed plugged, made of mahogany
The handrails are new, mahogany, screwed into M5 inserts in the stanchions
The mast step under the mast, binocular, is new
The 2 hatches are new
The portholes are new
The balcony is original
The winch supports are new, as well as the cockpit
All wooden parts of the boat with varnished finish have received 2 coats of Lazotic impregnation tint and 5 coats of Lenk varnish.
Rigging
The mast was decaped, restored, 2 coats of Lazotic and 5 of Lenk varnish
The original boom was modified to accommodate a roller furling foresail, 2 reef points, free furling, same finishing
The spinnaker pole was restored, same finishes
The shrouds, backstay, forestay, and sidestays are original, the splice overwraps are new
MOTOR
Vetus M2.02, 12 horsepower, launched in 2016
Underframe, stuffing box, tube, propeller shaft, propeller, custom 22L PVC tank, water scoop, fill for tank, exhaust, controls, etc. 2016
Annual service performed before wintering

STERN RUDDER
Axis, new fittings
The rudder is original and has been restored
The helm is original, the folding fitting is new

ELECTRICITY
12V system, battery 2016
220V system, charger, shore cord, circuit breaker 2016
2 retractable Navisafe running lights

DECK HARDWARE
All new since 2016
Pulleys and cleats Ronstan and Harken
Self-tailing winches Andersen
Sheets 6mm, halyards 8mm, Liros
Windex wind indicator

SAILS
All from 2016
Main sail 10m2, crosscut Dacron, 4 battens including 1 reefed, 2 reefs, 1 cunningham, loose luff
Genoa 14m2, crosscut Dacron
Interior sail 10m2, cdx5, triradial cut
Spinnaker, 38m2, white nylon superkot 75, triradial cut

Cabin, holds
All interior surfaces were lightly sanded and decaped, then received paint or oil coats
The engine hatch is new, some arrangements are original, others are new.
The wood is tinted and oiled with a satin finish
The holds are painted with 2-3 coats of Bilge Epifane
The berths are new

Armament
Coastal, complete, 2016

Dinghies
Inflatable 2.20m from 2017
Rigid 2.45m from 2017

Berth
Ber Mecanorem 1 axle, 4 chocks from 2017

The boat is sold ready to sail

OFFER PRICE NEGOTIABLE